Six Pictures Show You How To Lay Out Large Porcelain Slab

1.With suction cup, easy to carry

Use large porcelain slab professional suction cups, carrying bars to transport or perform paving operations, saving labor and safety.

2. Cut the angle, the stitching effect is good

On the operating table, a special cutting fixture is installed after accurate positioning, cutting with a 45 ° angle cutter, and grinding with a circular edger. The large porcelain slabs processed by a special cutting machine have a natural seam transition at the corners, like seamless stitching.

3. Stick well, adhesive is essential

Adhesive is a polymer modified cement-based interface treatment material, which can improve the bonding strength between large porcelain slab and tile adhesive.

4.To prevent the phenomenon of empty drums, the scratches must be consistent

Use a toothed scraper to evenly spread the adhesive on the back, wall or floor of the large porcelain slab. Pay attention to scraping the teeth along the short side of the large porcelain slab when scraping the glue. The air is discharged to avoid the problem of falling off of the tile glue.

5. Take a shot, more solid paving

After the large porcelain slabs are laid, use a rubber sheet to pat them on the large porcelain slabs evenly and firmly, compact the tile adhesive, exhaust air, and stick more firmly.

6.Two-pronged, flat and beautiful

The leveler base needs to be inserted into the edge of the large porcelain slab every 60cm. Use the large porcelain slab shifter to adjust the joint distance, and then insert a leveling wedge to adjust the surface flatness of the adjacent large porcelain slab.